Manufactur standard Welded Gabion - Welded gabion box – Yezhen
Manufactur standard Welded Gabion - Welded gabion box – Yezhen Detail:
1.Material:
Hot dipped galvanized
PVC coated wire
Gal-fan coated (95% Zinc 5% Aluminum for up to 4 times the life of a galvanized finish)
Stainless steel wire
2.Specification
Normal Box sizes (m) |
NO. of diaphragms (pcs) |
Capacity ( m 3) |
0.5 x 0.5 x 0.5 |
0 |
0.125 |
1 x 0.5 x 0.5 |
0 |
0.25 |
1 x 1 x 0.5 |
0 |
0.5 |
1 x 1 x 1 |
0 |
1 |
1.5 x 0.5 x 0.5 |
0 |
0.325 |
1.5 x 1 x 0.5 |
0 |
0.75 |
1.5 x 1 x 1 |
0 |
1.5 |
2 x 0.5 x 0.5 |
1 |
0.5 |
2 x 1 x 0.5 |
1 |
1 |
2 x 1 x 1 |
1 |
2 |
This table refers to the industry standard unit sizes; non-standard unit sizes are available in dimensions of multiples of the mesh opening | ||
Corrosion Protection |
Galvanized |
95% Zinc + 5% Alu |
PVC Coated |
Mesh Size |
50.8 x 50.8mm 76.2 x76.2mm |
50.8 x 50.8mm 76.2 x76.2mm |
50.8 x 50.8mm 76.2 x76.2mm |
Unite Size |
Wire Diameter |
Wire Diameter |
Wire Diameter |
1 x 1 x 1m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
2 x 1x 1m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
3x 1 x 1m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
4 x 1 x 1m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
1 x 1 x 0.5m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
2 x 1x 0.5m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
3x 1 x 0.5m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
4 x 1 x 0.5m |
3.0mm,4.0mm,5.0mm | 3.0mm,4.0mm,5.0mm |
3.0mm/3.8mm |
Product detail pictures:
Related Product Guide:
Wire Rope Sheaves Market Analysis, Emerging Trends, Revenue & Growth By 2024 | Top Leading Players: CERTEX Danmark A / S, Certex, DGCRANE, Samsel | Stainless Steel Rope
WPI inflation at nearly two-year low at 2.45 percent in May | Indiablooms | Hinge Joint Field Fence
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Manufactur standard Welded Gabion - Welded gabion box – Yezhen , The product will supply to all over the world, such as: Malaysia , Burundi , Bangladesh , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Phyllis from Canada - 2018.05.13 17:00
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Ellen from Costa rica - 2017.09.28 18:29
Write your message here and send it to us